Page: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16

Universal Bracket Kit III

As the name implies, Universal Bracket Kit III is not made to particular motorcycle brand or model. It is designed for installation on clamping bolts in clip-on handlebars, or clamping bolts in triple clamp.

Mounting Bolts of the bracket kit can be positioned at any angle around the stand offs. Length of the Crossbar is 11", to accommodate for different distances between clamping bolts in handlebars or triple clamp on different motorcycles. Extra length of the rod may be cut off, or utilized for installation of more gadgets. Crossbar provides mounting location for “Base Plate I" (Page 9), "Base Plate II" (Page 10) and "Housing for 26xx" (Page 11). In some installations if the distance between the inner edges of Swivel Joints is less than 2.5" (63.5 mm), then "Extension Joint" (Page 12) should be used for installation of base plates or housing. "Extension Joint" can also be used for adding flexibility in bracket kit configuration. Mounting Bolts supplied in Universal Bracket Kit III are M8 x 1.25 x 65. They are long enough to replace M8 x 1.25 x 30 motorcycle OEM bolts. There are two 1/2"OD x 1/2" tall x 8 mm ID Spacers on each Mounting Bolt.

Bracket Kit III modifications

In some motorcycles clamping bolts in clip-on handlebars are M6 instead of M8. In such cases the M8 Mounting Bolts in the kit are replaced with M6 Mounting Bolts and set of bushings added in order to fit M6 Mounting Bolts in 8 mm holes in Stand Offs.